The downloads featured on this page are the Creation Workshop Resin Profiles which contain all the settings and information needed for the resin used in the Liquid Crystal Pro. Each resin has a specific set of variables, exposure time for example, meaning that you will need to download the relevant profiles for the resin you have.

 

COMPLETE DOWNLOAD FOR LC PRO

Download all the Resin settings below for the Liquid Crystal Pro

 

NOTE

To get the profiles in creation workshop, download and extract the profiles. Then copy the ones required to the ‘Profiles’ folder in the Creation Workshop folder. Make sure there are only the .slicing files in the profiles folder.

The exposure times contained in the profiles are to ensure the print completes. It may cause some overexposure on small detail. If this is the case, you can manually adjust the times to best suit your requirements

If you have a powerful computer, for highest quality prints, set anti-aliasing to 10. This will take more processing power and not all computers can process slicing when anti-aliasing is 4 or above. If yours will not slice, keep anti-aliasing at 3.

 

The downloads featured on this page are the Creation Workshop Resin Profiles which contain all the settings and information needed for the resin used in the Liquid Crystal Pro. Each resin has a specific set of variables, exposure time for example, meaning that you will need to download the relevant profiles for the resin you have.

 

COMPLETE DOWNLOAD FOR LC PRO

Download all the Resin settings below for the Liquid Crystal Pro

 

NOTE

To get the profiles in creation workshop, download and extract the profiles. Then copy the ones required to the ‘Profiles’ folder in the Creation Workshop folder. Make sure there are only the .slicing files in the profiles folder.

The exposure times contained in the profiles are to ensure the print completes. It may cause some overexposure on small detail. If this is the case, you can manually adjust the times to best suit your requirements

If you have a powerful computer, for highest quality prints, set anti-aliasing to 10. This will take more processing power and not all computers can process slicing when anti-aliasing is 4 or above. If yours will not slice, keep anti-aliasing at 3.

 

Liquid error: Could not find asset snippets/zopim.liquid